Chinese | English

厂家logo
E-MAIL:15230713671@163.com           TEL:0086-17761570021
    TEE MACHINE
    Current position: HOME> Mechanical equipment>

    Aluminum alloy cold drawing tee machine

    Aluminum alloy cold drawing tee machine

    Mechanical parameters

    Model

    1/2”—4”

    1”—6”

    2”—8”

    3”—10”

    4”—12”

    5”—16”

    8”—20”

    T wall thickness

    Sch40

    Maximum pressure

    31.5MPa

    Pressure of work

    25 MPa

    In her work

    0—1000mm/min

    Returns the speed

    1500—2000mm/min

    Side of the cylinder bore

    360mm*2

    450mm*2

    550mm*2

    650mm*2

    750mm*2

    850mm*2

    950mm*2

    The side cylinder stroke

    300mm

    350mm

    400mm

    450mm

    500mm

    550mm

    600mm

    The side cylinder tonnage

    250T*2

    400T*2

    600T*2

    850T*2

    1100T*2

    1400T*2

    1600T*2

    Master cylinder bore

    400mm

    500mm

    600mm

    700mm

    800mm

    900mm

    1000mm

    Master cylinder stroke

    350mm

    400mm

    500mm

    600mm

    700mm

    800mm

    900mm

    Master cylinder tonnage

    315T

    500T*2

    700T

    1000T

    1200T

    1600T

    2000T

    The motor power

    50w

    55kw

    65kw

    75kw

    100kw

    120kw

    170kw

     

    Mechanical video

    Equipment details

    Aluminum alloy cold drawing tee machine

    Working principle of aluminum alloy cold-drawing tee: when the tee is hot pressed, the tube blank larger than the tee diameter will be compressed to the size of the tee diameter.After heating, the billet is put into the forming die, and the die for drawing branch pipe is loaded into the billet.Under the action of pressure, the billet is compressed radially. During the process of radial compression, the metal flows to the branch pipe and the branch pipe is formed under the drawing of the die.The whole process is formed by the radial compression of the billet and the stretching of the branch pipe.Different from the hydraulic bulging tee, the metal of the hot pressing tee branch pipe is compensated by the radial movement of the tube blank, so it is also called radial compensation process.

     

    Due to the use of heating and pressing the tee, the tonnage of equipment needed for material forming is reduced.Aluminum cold-drawing tee machine has wide adaptability to materials, suitable for low carbon steel, alloy steel, stainless steel materials;Especially for the tee with large diameter and thick wall, this forming process is usually adopted.