Chinese | English

厂家logo
E-MAIL:15230713671@163.com           TEL:0086-17761570021
    TEE MACHINE
    Current position: HOME> Mechanical equipment>

    Aluminum alloy cold drawing tee machine

    Aluminum alloy cold drawing tee machine

    Mechanical parameters

    Tee machine

    Processing range

    1/2”—4”

    1”—6”

    2”—8”

    3”—10”

    4”—12”

    5”—16”

    8”—20”

    Tee thickness

    Sch40

    Max.pressure

    31.5MPa

    Working pressure

    25 MPa

    Working speed

    0—1000mm/min

    Return speed

    1500—2000mm/min

    Side cylinder diameter

    360mm*2

    450mm*2

    550mm*2

    650mm*2

    750mm*2

    850mm*2

    950mm*2

    Side cylinder stroke

    300mm

    350mm

    400mm

    450mm

    500mm

    550mm

    600mm

    Side cylinder tonnage

    250T*2

    400T*2

    600T*2

    850T*2

    1100T*2

    1400T*2

    1600T*2

    Master cylinder diameter

    400mm

    500mm

    600mm

    700mm

    800mm

    900mm

    1000mm

    Master cylinder stroke

    350mm

    400mm

    500mm

    600mm

    700mm

    800mm

    900mm

    Master cylinder tonnage

    315T

    500T*2

    700T

    1000T

    1200T

    1600T

    2000T

    The motor power

    50kw

    55kw

    65kw

    75kw

    100kw

    120kw

    170kw

     

     

     

     

     

     

    Mechanical video

    Equipment details

    Aluminum alloy cold drawing tee machine
    Working principle of aluminum alloy cold drawing tee machine: when the tee is hot pressed, the blank larger than the diameter of the tee will be flattened to the diameter of the tee. The tube billet is heated and put into the forming die, and the punching die of the tensile branch tube is loaded into the tube billet. Under the action of pressure, the tube billet is compressed radially. In the process of radial compression, the metal flows towards the branch pipe and forms the branch pipe under the stretching of punching die. The whole process is formed by the radial compression of the tube billet and the stretching of the branch part. Different from hydraulic bulging tee, the metal of hot-pressed tee branch pipe is compensated by the radial movement of the tube billet, so it is also called radial compensation process.
     
    By pressing the tee after heating, the tonnage of equipment required for material forming is reduced. Aluminum alloy cold drawing tee machine has wide adaptability to materials, suitable for low carbon steel, alloy steel, stainless steel materials; Especially the big diameter and tube wall thick tee, usually using this forming process.