Chinese | English

厂家logo
E-MAIL:15230713671@163.com           TEL:0086-17761570021
    HOT FORMING ELBOW MACHINE
    Current position: HOME> Mechanical equipment>

    Medium frequency elbow press type

    Medium frequency elbow press type

    Mechanical parameters

    型号

    1”—6”

    3”—12”

    8”—24”

    16”—30”

    20”—36”

    30”—48”

    32”—56”

    最大弯头壁厚

    Sch40

    最大压力

    31.5MPa

    工作压力

    25 MPa

    工作速度

    0—1000mm/min

    快退速度

    1500—2000mm/min

    油缸内径

    125mm*2

    180mm*2

    300mm*2

    320mm*2

    360mm*2

    280mm*4

    320*4

    油缸行程

    3000mm

    4000mm

    5000mm

    5000mm

    6000mm

    8000mm

    10000mm

    油缸推力

    30T*2

    30T*2

    175T*2

    200T*2

    250T*2

    150T*4

    200T*4

    电机功率

    18.5kw

    22.5kw

    37.5kw

    48kw

    56kw

    68kw

    80kw

    所需要的中频电源

    160kwa

    250kwa

    400kwa

    500kwa

    600kwa

    800kwa

    1000kwa

     

     

     

     

    Mechanical video

    Equipment details

    Intermediate frequency elbow mechine for process - hot push forming
    Hot push elbow forming process is the process of using special medium frequency elbow machine, core die and heating device to make the blank covered on the die move forward under the push of the pushing machine. Elbow molding heating ways, and the use of which heating mode is generally based on product requirements and energy conditions.
    The deformation characteristics of the medium frequency heat pushing elbow machine is, according to the volume before and after plastic deformation rule of metal materials determine the pipe diameter, it USES the pipe diameter less than bend diameter, through the core module and control the deformation of the process, make the inner arc compressed metal flow, the compensation to other parts of the thinned by hole diameter, wall thickness uniformity is obtained the elbow products. Stainless steel elbow from carbon steel elbow is the main material is different, its chemical composition will remain elbow surface for a long time will not rust, does not corrode.
     
    In piping systems, elbows are fittings that change the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used, in addition, according to engineering needs also include 60° and other abnormal Angle elbow.